5340-01-131-2304, 5340011312304 (Bracket Angle) - National Stock Number Lookup

NSN 5340-01-131-2304 of part number 9M700C1-10LAW, 9M700C1-10LAW, 9M700C1-10LAW by the manufacturer, Boeing Company The, Fastener Specialty Inc, Trico Mfg Inc is in stock and ready to ship out. We make NSN parts purchasing as simple as possible. We list corresponding components such as 5340-01-131-2304 so that you can make the purchasing decision that is right for you. Our dedicated team are on hand to help source any-hard-find NSN parts or answer any procurement questions. We only source from manufacturers we trust and are the only independent distributor with a NO CHINA SOURCING policy. Unlike other companies, we pair every customer with a dedicated account manager. We respond to all RFQs within 15 minutes. Submit an RFQ today to get started.

5340-01-131-2304 NSN Information

Alternative NSN: 5340-01-131-2304
Item Name: Bracket Angle
FSG: 53 Hardware and Abrasives
Federal Supply Class (FSC): 5340 Hardware Commercial
NIIN: 011312304
NCB Code: USA (01)
Manufacturers: Boeing Company The, Fastener Specialty Inc, Trico Mfg Inc

NSN 5340-01-131-2304 Manufacturing Part Numbers

Part No Manufacturer Item Name QTY RFQ
9M700C1-10LAW fastener specialty inc bracket angle Avl RFQ
9M700C1-10LAW trico mfg inc bracket angle Avl RFQ
9M700C1-10LAW boeing company the bracket angle Avl RFQ

Product Specification of NSN 5340011312304

MRCCriteriaCharacteristic
ADLKFIRST LEG LENGTH0.750 INCHES NOMINAL
ADLLSECOND LEG LENGTH0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM
AHLFSECOND LEG WIDTH1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM
AHLGSECOND LEG CORNER RADIUS0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHLKFIRST LEG HOLE DIAMETER0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM
AHLNSECOND LEG HOLE DIAMETER0.263 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
AHLPSECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.000 INCHES NOMINAL
AHLVSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHLWSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHPWFIRST LEG THICKNESS0.063 INCHES NOMINAL
AHPXSECOND LEG THICKNESS0.063 INCHES NOMINAL
AHQNFIRST LEG WIDTH1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM
AHQPFIRST LEG CORNER RADIUS0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHQYFIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AHQZFIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AHRAFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AHRBFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
AJZUFIRST LEG STYLECORNER RADIUS
AKAUFIRST LEG HOLE ARRANGEMENT STYLETHREE HOLES
AKBUSECOND LEG STYLECORNER RADIUS
AKCUSECOND LEG HOLE ARRANGEMENT STYLETWO HOLES
CBBLFEATURES PROVIDEDNUT
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
CSSQFIRST LEG ANGLE90.0 DEGREES NOMINAL
FEATSPECIAL FEATURESNUT LH POSITION AND INVERTED INSTALLATION
MATTMATERIALALUMINUM ALLOY 2024
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3 T8511 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5 T72 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5 T81 FED SPEC SINGLE MATERIAL RESPONSE
SFTTSURFACE TREATMENTANODIZE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
STYLSTYLE DESIGNATORANGLE

NSN 5340-01-131-2304 - Similar National Stock Numbers

5305-00-001-2049 5305-00-001-3855 5305-00-001-3861 5305-00-001-3862
5305-00-001-3869 5305-00-001-3878 5305-00-001-3914 5305-00-001-4017
5305-00-001-4108 5305-00-001-4698 5305-00-001-4713 5305-00-001-4752
Get an Estimate for Your Required Component

You will receive a response in 15 minutes or less


Prominent NSN Parts Brands

Highly Demanding NSN Components

View More







Install ASAP App for Quick Actions